| |
Repetitive use of power tools when mixing cement, mortar, plaster, or grout exposes workers to hand-arm vibration, and is a risk factor for hand-arm vibration syndrome and carpal tunnel syndrome.
|
|
| |
Work loads or activities are of such a magnitude and character that a significant number of workers risk developing an MSD in the short or long term.
A comprehensive review by NIOSH concluded there is strong evidence from epidemiology and biological studies that exposure to hand-arm vibration causes hand-arm vibration syndrome (HAVS).The risk increases as the magnitude and duration of exposure to vibrating tools increases.There is also a link between exposure to hand-arm vibration and carpal tunnel syndrome.
The precise level of vibration that is harmful is not fully understood. There are, however, U.S. and international standards that describe doses currently regarded as "acceptable." These standards include the International Standard (ISO) 5349 (1986), American National Standard (ANSI) S3.34 (1986), and the American Conference of Governmental Industrial Hygienists (ACGIH) threshold limit value (TLV) for Hand-Arm Vibration.In general, the higher the acceleration level, the shorted the exposure time should be.
When operating a conventional vibrating tool, the tissues of the fingers and palm absorb more than 90% of the transmitted energy from the tool. This energy absorption causes injuries to the nerves, resulting in deficits in touch and temperature sensation. The small fiber nerve damage appears to be largely irreversible. Large impact tools, such as jackhammers, produce low-frequency tissue waves that can also affect the shoulder and neck.
|
|
| |
To assess exposure to vibration, determine the associated magnitude of acceleration (m/s2) and the primary frequency (Hz) of the vibration. Also, visit Thomas Bernard's website for a host of practical ergonomic tools.
Assessment Info – Hand Arm Vibration
To determine the level of exposure, the vibration magnitude is measured in terms of the acceleration (m/s2) of the surface of the tool that is in contact with the hand, and the primary frequency (Hz) of the vibration. The risk of injury depends on both the magnitude of the vibration and the amount of time a worker is exposed to the vibration.
Specialized instruments (accelerometers) are needed for assessment of vibration. It is best to contact someone who has experience with measuring vibration to determine the level of vibration exposure.After the acceleration, primary frequency, and exposure time are known, various standards can be used to determine if the vibration is potentially harmful.These standards include ISO 5349, ANSI S3.34-1986, and the American Conference of Governmental Industrial Hygienists (ACGIH) threshold limit value (TLV) for Hand-Arm Vibration.
Thomas Bernard's website has a host of practical ergonomics tools, including the ACGIH-TLV for Hand-Arm Vibration:
http://personal.health.usf.edu/tbernard/ergotools/index.html. |
| References |
|
|
Less Detail
|
|
|
| |
|
Federal OSHA Standards
are enforced by the U.S. Department of Labor in 28 states. There are currently
22 States and jurisdictions operating complete State plans
(covering both the private sector and State and local government employees)
and 4 — Connecticut, New Jersey, New York and the Virgin Islands — which cover public employees only.
California,
Oregon, and
Washington, have complete standards for
construction.
Michigan,
Minnesota,
Maryland,
Virginia and
Kentucky
have amended some OSHA standards and have added requirements not included in Federal rules.
Puerto Rico
has a Spanish translation of Federal standards. If you are working in one of those states
you should ensure that you are complying with all state requirements. The remaining state plan states have adopted
and enforce the federal OSHA standards as written.
Regulations adopted by a state must be at least as protective as the corresponding federal standard. Work may also be
subject to rules of other federal, state and local agencies. Even where there is no hazard specific standard, OSHA
prohibits employers from to work in surroundings or under working conditions which are unsanitary, hazardous, or
dangerous to his health or safety.
|
|
Hide Regulations & Standards Detail
|
|
|