Construction Solutions - Upright Aviation Snips



Solution: Upright Aviation Snips
	E-mail this Solution to a Friend


	Description:	Sheet metal workers and other construction workers use aviation snips to cut sheet metal. In many situations, the construction worker must place their wrist in an awkward posture to reach the area to be cut. Aviation snips with the blades offset from the handle, also called upright snips, may help reduce these awkward and painful postures. More Detail Cutting sheet metal with aviation snip takes a lot of hand force. You often need to work with your wrist in an awkward position. If you do this work frequently or for long periods of time, you may experience hand or wrist pain. Eventually you may develop a serious injury. Upright/offset aviation snips help to maintain the wrist in a neutral position which may reduce the hand force necessary to cut sheet metal. Upright aviation snips are those with the blade offset approximately 90° to the handle. They can be used with the blade up or down. They can produce the same amount of grip force with less effort. Advantages of upright aviation snips include: Ergonomic design (90° handle and blade) that helps maintain a neutral position at the wrist Makes work in tight over the shoulder areas easier, faster, and less fatiguing Easily rotates around circular cutting patterns Elevates hand and fingers above the surface of the metal for safer cutting Regardless of the type of snip, use the right size and style of snip for the task. Any snip you use should be sharp and the hinges and springs should be tight. Construction workers should avoid using dull or damaged snips. Where necessary use compound snips, which provide much more power. Some compound snips will increase your cutting strength by 12 times. Less Detail
	Risks Addressed:	Stressful Hand/Wrist Activity
	How Risks are Reduced:	An upright snip helps keep your wrist in a more neutral position when working in confined areas or overhead. Keeping the wrist in a straighter potentially reduces the amount of hand force necessary to perform the cut. This design may also help keep your hand away from sharp metal edges as you make the cut. Quality of Evidence Independent published studies have found a risk reduction. Manufacturers, vendors, or worksites have reported a risk reduction. Safety and health experts believe there is a risk reduction. Manufacturers report that upright aviation snips reduce the pressure placed on hands compared to other sheet metal cutting tools. The hand force required to use these aviation snips falls far below the industry standard maximum. An independent published study measured the effect of aviation snip type on wrist posture and muscle exertion. Upright aviation snips used at shoulder height produced optimal wrist position. However, muscle exertion was less when using upright snips at waist height than at shoulder height. The twenty-three sheet metal workers who participated in the study preferred using the upright aviation snips at shoulder height.
	Effects on Productivity:	Sheet metal workers frequently sustain injuries to their hand, wrist, and shoulder. Using aviation snips reduces the stress on these areas. Quality of Evidence Manufacturers or vendors have reported an increase in productivity. Safety and health experts believe there is an increase in productivity. Manufacturers report that workers using upright aviation snips experience less pain and injury, allowing them to be more productive and miss less work.
	Return on Investment:	No specific calculation ROI information exists for this particular solution, however, there are some general approaches that might be useful for a “Return On Investment” analysis. For a general discussion of these approaches, visit our “Return on Investment Calculation” page.
	Availability:	Midwest Tool and Cutlery Co., Sturgis, MI, www.midwestsnips.com Demonstration Video: DSL/High Speed Cooper Hand Tools, Apex, NC, www.cooperhandtools.com Klein Tools, Lincolnshire, IL, www.kleintools.com Klenk Tools, Canton, OH, www.klenktools.net
	Additional Considerations:	Improvements found in the newer snips include less space between the handles, soft grips and curved handles. Using a curved handle can help keep your wrist straight. A soft grip lowers the pressure on your hand and fingers. When the space between handles is less, you may be able to get a better grip on the tool. No pair of snips will work well for every task. Decide what the job requires and select the correct snips. Manufacturers make specific snips for left and right cuts, straight cuts, and wide or tight curved cuts. Manufacturers color-code snip handles for the type of cut they make— yellow for straight, green for right, and red for left. There are specific snips for different gauges of sheet metal. Always wear eye protection when using snips.
	Hazards Addressed:	Electrical Cut, shape and place conduit and wire trays Stressful hand & wrist activity Install and repair high voltage lines, transformers, switches Stressful hand & wrist activity Sheet Metal & HVAC Install flashing, rain gutters and down spouts Stressful hand & wrist activity Operate laser cutter and metal shearing machine Lifting and Carrying (Manual Materials Handling) More Links
	Sources: